Pressing Instructions For regular DTF
Trim Label and color bar (they'll press on your garment if not removed.)
Trim excess film around your transfer as close to the design as possible.
Pre-press garment for 10 seconds to remove moisture and any wrinkles in the pressing area. This is a good time to add your center fold if you choose to.
Cotton and Cotton Blends: Press at 285 to 290 degrees for 12-15 seconds with a teflon sheet or fresh parchment paper.
Polyester and Nylons: Press at 265 to 275 for 12 seconds with teflon or parchment.
Heavy Pressure
Set your garment aside and cold peel the transfer film; re-press for 5 seconds with fresh parchment paper or teflon sheet to seal.
Pressing Instructions for Gold, Silver and Sparkle
Trim Label and color bar (they'll press on your garment if not removed.)
Trim excess film around your transfer as close to the design as possible.
Pre-press garment for 10 seconds to remove moisture and any wrinkles in the pressing area. This is a good time to add your center fold if you choose to.
Press at 310-315 for 15 seconds and allow to cool completely, discard film once cooled. You may see jagged edges surrounding your print, thats ok! Once cooledd, take a soft bristly bruch (paint brush) to the edges and knock off the jagged edges to reveal a smooth clean image.
Second press, turn the garment inside out and press from the inside or from the back to get a finish that feels like the DTF is part of the garment.
Quick Links
Help
Subscribe & Follow
918-863-4161
Info@dbcustomcreations.com
Copyright © 2022 DB Custom Creations. All Rights Reserved.
